How to Replace a Coin-Co Coin Operator on a TBS Kiosk/9900

Replacing the Coin-co coin operator in your TBS Kiosk/9900 coin tower is a manageable task that can help restore smooth operation if your coin mechanism is malfunctioning. Below, you’ll find step-by-step instructions to guide you through the process. While we can’t provide images directly here, we’ll describe each stage in detail so you can follow along confidently.

Before You Begin

• Tools Needed: Flathead screwdriver and a clean workspace.

• Safety First: Unplug or disconnect the coin tower from any power source to avoid electrical hazards.

Step 1: Open the TBS Kiosk/9900 Coin Tower

1. Unlock and Open: Unlock your device and turn the lock to the left until the back door is released. Gently swing open the back panel to access the internal components.

Step 2: Identify the Coinco Coin Operator

The coin operator is usually a rectangular or cylindrical mechanism situated at the front of the coin path. It’s responsible for accepting and verifying coins before they drop into the collection box.

Step 3: Disconnect the Operator

1. Disconnect Power and Data Cables: Carefully unplug any wires or connectors attached to the coin operator. Make a note or take a photo of how these are connected for reassembly.

2. Loosen Mounting Screws: Use your Flathead screwdriver to loosen the screws securing the coin operator in place. These screws do not need to be removed.

Step 4: Remove the Old Coin Operator

Lift the coin operator up from from the mounting screws. If it feels stuck, check for any additional securing clips or fasteners that may need to be released.

Step 5: Install the New Coinco Coin Operator

1. Position the New Operator: Align it with the mounting bracket or slot in the coin tower, ensuring it sits flush and straight.

2. Secure with Screws: Fasten the mounting screws you loosened earlier. Tighten them just enough to hold the operator firmly but avoid over-tightening to prevent damage.

3. Reconnect Cables: Plug the power and data cables into their corresponding ports, using your notes or photos as a guide.

Step 6: Test the Installation

1. Restore Power: Plug the coin tower back into its power source or reconnect as needed.

2. Test with Sample Coins: Insert a few coins to ensure the new operator accepts and registers them correctly. Watch for jams or misreads.

Step 7: Close and Secure the Coin Tower

1. Close the Access Panel: Carefully swing the panel shut and tighten/lock the Locking Mechanism.

2. Final Check: Confirm that the coin tower is stable and operational before leaving it unattended.

Troubleshooting Tips

• If the new coin operator doesn’t power on, double-check all cable connections.

Need More Help?

If you run into any difficulties or your machine does not function as expected after the replacement, consider reaching out to TBS Support. Having the exact model numbers and details on hand will make the process smoother.

With these steps, you should be able to replace your Coinco coin operator and get your TBS Kiosk/9900 coin tower back in working order. Good luck!