How to calibrate Gryphon Coin Operator

Calibrating your Gryphon Coin-op is an important step to ensure your machine accurately handles coins and operates smoothly. Whether you’re setting up your machine for the first time or recalibrating after maintenance, following the correct process will help keep everything running reliably. Below, you’ll find a step-by-step guide to calibrate your Gryphon Coin-op with clear instructions to make the process easy.

Before You Begin: Prepare the Coin Tubes

Before starting the calibration process, it's essential to make sure the coin tubes inside your Gryphon Coin-op are completely empty. This allows the machine to properly detect and calibrate the mechanisms without interference from leftover coins.

• Open the machine’s coin compartment.

• Remove any coins from all coin tubes.

• Double-check that each tube is completely empty before proceeding.

Accessing the Calibration Menu

The calibration process is performed through the Gryphon Coin-op’s built-in menu system. Here’s how to access the right menu:

1. Enter the Main Menu: Tap the button with three lines (located under the screen). This opens the main menu interface.

2. Enter the Setup Menu: Press the E button to select and enter the setup menu.

3. Find the Next Page: Press the F button to scroll to the next page of the menu. This helps you navigate to further options.

4. Enter the General Menu: Tap the B button to access the general menu where calibration settings are located.

5. Enter the Calibration Menu: Press the A button to enter the calibration menu.

Running the Calibration Process

With the calibration menu open, you’re ready to begin calibration. Here’s how:

1. Start Calibration: Press the F button. This will start the calibration sequence automatically.

2. Wait for Calibration to Finish: The machine will run through its calibration process. This may take a few moments. Let the process complete without pressing any additional buttons or inserting coins.

Exiting the Menu

Once the calibration is finished, you’ll need to exit the menu system and return the machine to its normal operating mode:

• Press the three lines button (under the screen) three times in a row. This will back you out of the menus and return the display to its standard view.

Tips for a Smooth Calibration

• Do not insert any coins during the calibration process. The tubes should remain empty until the process is complete.

• If you make a mistake, you can always exit the menu and start over—just make sure the tubes are still empty before restarting.

• Periodically recalibrating your Gryphon Coin-op can help prevent counting errors and improve the reliability of your machine.

Troubleshooting

• If the calibration does not start, double-check that you’re following the menu steps in the correct order.

• Should the process get interrupted, exit the menu and restart from the beginning after ensuring the coin tubes are still empty.

• If you continue to experience issues, consult your Gryphon Coin-op user manual or contact support for additional help.

That’s it! Your Gryphon Coin-op should now be calibrated and ready for use. Regular calibration helps ensure accuracy and keeps your machine in top working condition.