aVision Scanner Error Codes
aVision Error Codes:
Err999=Cannot find the device driver or power off or cable failure.
Err1= Cannot find the scanner.
Err2=Scanner R/W test fails.
Err3=Scanner connection fails.
Err4=Scanner RAM test fails.
Err5=Scanner RAM test fails.
Err6=Scanner DMA test or power cable fails.
Err7=Calibration fails.
Err8=Scanner internal error.
Err9=Paper feed error.
Err10=Sensor error. Unlock the scanner by turning the lock switch to the "Unlocked position".
Err11=Transparency calibration error.
Err101=Power off or cable fails.
Err102=Please remove the shipping retainer.
Err103=Paper jam.
Err104=The cover of auto document feeder is open.
Err105=No paper in the auto document feeder.
Err106=Job separation sheet detected.
Err107=To scan transparency, you must first install a transparency kit.
Err108=Transparency kit turns off.
Err109=Internal target fails.
Err110=Fuse blown out.
Err111=Fuse blown out.
Err112=Fuse blown out.
Err113=Fuse blown out.
Err114=Mechanical system failure.
Err115=Optical system failure.
Err116=Illegal scanner parameter.
Err117=Illegal scanner parameter.
Err118=Illegal scanner parameter.
Err119=Illegal scanner parameter.
Err120=Illegal scanner parameter.
Err121=Message error.
Err122=Image transfer error.
Err123=Unknown error.
Err124=No ASPI managers are found.
Err125=Cannot find SCSI ASPI.
Err126=An ASPI manager which does not support Windows is resident.
Err127=Insufficient memory.
Err128=Cannot find winaspi.dll or wnaspi32.dll.
Err129=Cannot find the scanner.
Err130=Cannot initialize SCSI manager.
Err50=Termination timeout.
Err51=Reverse timeout.
Err52=Forward timeout.
Err50=Negotiation timeout.
Err150=Driver busy.
Err151=Parameter check error.
Err152=Allocating memory fails.
Err153=Driver initial fails.
Err154=Scanner internal error.
Err155=Scanner connection fails.
Err156=Reading image error.
Err157=Reading image error.
Err158=End image error.
Err159=Stop scanning due to pressing the Stop button.
Err160=Driver initial fails.
Err161=Sending scanner parameter fails.
Err162=Scanner busy.
Err163=Sending command error.
Err164=Scanner warms up.
Err165=Power off.
Err170=Parallel not found.
Err171=Scanner connection fails.
Err172=Scanner connection fails.
Err173=Scanner connection fails.
Err174=Scanner initial fails.
Err175=Scanner initial fails.
Err176=Back to home position fails or scanner lock error.
Err177=Search start position error.
Err178=Lamp cannot be turned on.
Err179=Scanner lock error.
Err180=Interrupt error.
Err181=Bad pixel.
Err182=row data value too low.
Err183=row data value too high.
Err184=end of page.
Err185=Wrong chart.
Err186=For storing rear page of interlace duplex scan.
Err187=Multiple feed.
Err188=Accessories such as ADF was plugged out.
Err189=End of page with multi-feed detected.
Err190=Flatbed Home Sensor Error.
Err191=ADF Home Sensor Error.
Err192=Flatbed DRAM Error.
Err193=ADF DRAM Error.
Err194=Flatbed Lamp Error.
Err195=ADF Lamp Error.
Err196=Flatbed cover open.
Err250=System error.
Err251=Driver internal error.
Err2000=Driver busy
Err2001=Scanner busy
Err2002=I/O port is busy.
Err2003=Handshake time Out.
Err2004=Scanner connection fails.
Err2005=Parameter check error.
Err2006=Allocating memory fails.
Err2007=Lamp cannot be turned on.
Err2008=Scanner locked.
Err2009=Scanner warms up.
Err2010=Stop scanning due to pressing the Stop button.
Err2011=Register R/W verification fails.
Err2012=Memory R/W verification fails.
Err2013=Paper jam.
Err2014=The cover of the auto document feeder is open.
Err2015=No paper in the auto document feeder.
Err2016=Cannot find the transparency kit.
Err2017=Transparency kit is power off.
Err2018=Cannot find winaspi.
Err2019=Cannot find the scanner.
Err2020=Calibration fails.
Err2021=Back to home position fails.
Err2022=End of page.
Err2023=Operation system return error.
Err2024=Write NVM Error.
Err2028=Endorser - ADF Cover Open.
Err2029=Endorser - Paper Jam.
Err2030=The ADF slider cover is not closed.
Err2031=Read prepare date failed.
Err2032=Wait media into scanner.
Err2999=Unknown error
Err3001=Flatbed home sensor error.
Err3002=ADF home sensor error.
Err3003=Flatbed DRAM error.
Err3004=ADF DRAM error.
Err3005=Flatbed lamp error.
Err3006=ADF lamp error.
Err3007=Document cover is open.
Err3008=Accessories such as ADF is plugged out.
Err3009=Pre-feeding.
Err3101=Multiple feed.
IDS_LOWMEMORY=Low memory. Please free some memory and try again.
IDS_NOPAPER=No paper in the auto document feeder.
IDS_NOPAPER1=Please insert paper and try again.
IDS_NODISK=Not enough disk space
IDS_NODISK1=Please free some disk space and try again.
IDS_WRITEERROR=Write to file error.
IDS_WRITEERROR1=It may be either:
IDS_WRITEERROR2=1.) Disk full
IDS_WRITEERROR3=2.) Disk write protect
IDS_WRITEERROR4=Please check again.
IDS_TRANSFER=Transfer
IDS_CHUNKY=Data Chunky && Transfer
IDS_MEMORY_P=Buffered Memory / P
IDS_MEMORY_C=Buffered Memory / C
IDS_NATIVE=Native Memory
IDS_NATIVE_P=Native Memory / P
IDS_DISK=Disk File
IDS_DISK_P=Disk File / P
IDS_MEMORY=Buffered Memory